Marshfield
Signature Series®
&
Marshfield Accent Series® |
Design Options - Applied Mouldings |
| |
|
|
|
Applied Mouldings |
|
Marshfield DoorSystems offers five standard applied mouldings. They are: |
|
| |
|
|
- Unfinished and primed doors will not have nail holes filled.
|
|
- Factory finished doors with applied mouldings will have nail holes filled.
|
- Modified #5 moulding will be used as standard on Workable Surface Doors with surface applied mirrors, white boards, or cork board.
Profile 5 is the applied moulding that will be used on the Marshfield DoorSystems Styled™ Door unless specified otherwise. Additional custom mouldings are available to suit any project. (An upcharge for custom moulding will apply and additional lead-time is required.) Mouldings are available in most species of lumber. |
| |
| |
Applied Mouldings for Fire Doors (2) |
| |
|
|
|
|
|
| |
|
UL
20-minute |
UL
45-90-minute |
ITS-WH
20-minute |
ITS-WH
45-90-minute |
| |
 |
| |
Maximum Size |
No Limit |
1-1/2" x 3/4" |
No Limit |
1-1/2" x 3/4" |
| |
Application Method |
Glue |
Glue |
Glue |
Glue |
| |
|
|
|
|
|
| |
Minimum Distance between Parallel Moulding Pieces |
No Limit |
3" |
No Limit |
3" |
| |
|
|
|
|
|
| |
Minimum Distance between
Lite and Applied Moulding |
No Limit |
No Limit |
3-1/2" |
3-1/2" |
| |
|
|
|
|
|
| |
Minimum Distance between
Door Edge and Moulding (1) |
1" |
1" |
1" |
1" |
|
| |
| (1) Moulding must not interfere with the operation of the door, hardware or accessories. |
| (2) Installation of applied moulding on doors with either UL or ITS-WH labels must be done by Marshfield DoorSystems or a licensed machiner. |
| |
| Note: Marshfield DoorSystems, Inc. doors are manufactured per the standards listed on this page. Specifications are subject to change without notice. |
| Marshfield Signature Series doors meet WDMA premium grade and AWI custom grade standards. |
800.869.3667 / www.marshfielddoors.com / doors@mdrsys.com
Copyright © 2007 Marshfield DoorSystems, Inc.
|
